01224 749051

Thermobile AT307 Waste Oil Workshop Heater

Waste Oil Burner 102,000 BTU 1000m3/hr Man Ignition

Save on workshop heating costs by using waste oils produced on your business premises as FREE heating fuel. The capital cost of the Thermobile AT307 heater can typically be paid back within one season, resulting in large savings in future.

This waste oil workshop heater can burn used oil (synthetic or mineral) from petrol or diesel engines, gearboxes, transmissions and hydraulic systems. In addition, the heater can burn waste oil mixed with diesel, or diesel only. (The following should never be used; solvents, thinners, transformer oil, petrol, petro-chemical based oils, or oils above SAE90).

(Thermobile have discontinued this version)

  • ● Sealed combustion chamber suitable for use in garages
  • ● Overheat thermostat prevents unit from overheating
  • ● Flame failure protection switches off heater if ignition problems arise
  • ● Burner pan overflow device switches off fuel pump to prevent oil spillage
  • ● Combustion chamber pressure relief valve for safety
  • ● Combustion air intake allows option of drawing air from outside (no dangerous fumes)

AT307 Waste Oil Workshop Heater

  • ● Manual Ignition Waste Oil Heater
  • ● Electricity Supply : 230V
  • ● High and Low heat settings
  • ● Net Heat Output BTU : 60,000 and 80,000 BTU/hr (actual maximum will depend on type of waste oil used)
  • ● Heated Air Flow : 1000 cubic metres/hour
  • ● Fuel Consumption : 2 - 3 litres/hr
  • ● Fuel Tank Capacity : 50 litres
  • ● Dimensions : 540 W x 1050 D x 1270 H

Thermobile waste oil heaters are backed by 50 years experience in the development and manufacture of space heaters, ensuring a reliable product which will give full customer satisfaction.

Thermobile AT307 Waste Oil Heater diagram

Burning of waste oil is regulated. See more information.

For SWOB (Small Waste Oil Burners up to 0.4MW) permit application:-

  • ● Manufacturer: Thermobile
  • ● Model: AT307
  • ● Burner Type : Vaporising
  • ● Net Rated Thermal Input : 0.029MW / 100,000BTU / 29KW

heater product code : R096.6002

internal (vertical) combustion air kit : R018.3017
external (horizontal) combustion air kit : R018.3018
complete flue kit : R018.3001
1000mm flue pipe : R018.3051
500mm flue pipe : R018.3052
flue 45 degree bend : R018.3057


Waste Oil Burner AT307 102,000 BTU 1000m3/hr Man Ignition

£2,220.00 + VAT..... £2,664.00 (GBP)
carriage code 8

call us to order

FINANCE AVAILABLE (£1000 minimum)