THERMOBILE FK8 flue kit

This complete flue kit provides a minimum of about 5 metres above ground level (check height of flue tee-piece on heater and add 4 metres). The top of the flue should be 1 metre above the roof apex. Additional metre long flue pipes are available to purchase separately to achieve this. The kit also includes a high temperature rubber seal plus sealant and screws to make the roof penetration water-tight. Two wall bands are also provided to support the flue.

Flue Diameter : 8 inches

• ● Kit fits the following:-
• ● R096.6038 - PSO 250 ERP heater
• ● R096.6039 - PSO 300 ERP heater
• ● R096.6048 - PSG 250 heater
• ● R096.6049 - PSG 300 heater