01224 749051

THERMOBILE FK7 flue kit

7in Flue Kit for PSO/PSG 150/175/200 heaters

This complete flue kit provides a minimum of about 5 metres above ground level (check height of flue tee-piece on heater and add 4 metres). The top of the flue should be 1 metre above the roof apex. Additional metre long flue pipes are available to purchase separately to achieve this. The kit also includes a high temperature rubber seal plus sealant and screws to make the roof penetration water-tight. Two wall bands are also provided to support the flue.

Flue Diameter : 7 inches

  • ● Kit fits the following:-
  • ● R096.6035 - PSO 150 ERP heater
  • ● R096.6036 - PSO 175 ERP heater
  • ● R096.6037 - PSO 200 ERP heater
  • ● R096.6045 - PSG 175 heater
  • ● R096.6046 - PSG 250 heater
  • ● R096.6047 - PSG 200 heater

flue kit product code : R018.3091

EXTRA PIPES
for 1000mm flue pipe see : R018.3085
for flue 45 degree bend see : R018.3087

R018-3091 heater flue kit

R018.3091
THERMOBILE FK7

7in Flue Kit for PSO/PSG 150/175/200 heaters

£386.00 + VAT..... £463.20 (GBP)
carriage code 8