THERMOBILE FKPH 60 flue kit
150mm Flue Kit for ProHeat 60 cabinet heaters
This complete flue kit provides a minimum of about 5 metres above ground level (check height of flue tee-piece on heater and add 4 metres). The top of the flue should be 1 metre above the roof apex. Additional metre long flue pipes are available to purchase separately to achieve this. The kit also includes a high temperature rubber seal plus sealant and screws to make the roof penetration water-tight. Two wall bands are also provided to support the flue.
Flue Diameter : 150 mm
- ● Kit fits the following:-
- ● R096.6092 - ProHeat 60 ERP heater