skip to top

01224 749051

73KW Gas Cabinet Heater - 230V

horizontal line

*Please state fuel type (natural gas or propane) at time of ordering*

This range of cabinet heaters for workshops, warehouses, industrial units, factories and retail areas is compliant with Part L2B of the 2010 Building Regulations. These space heaters are pre-wired with an electronic programmer to control heater on/off cycles, temperature, frost protection etc. A combined fan and limit switch is fitted on all heaters. In the event of overheating the unit will be automatically shut down by the limit thermostat. A four pass combustion chamber/heat exchanger assembly provides improved thermal efficiency with extended operational life. The stainless steel chamber is combined with a high efficiency cross flow tubular heat exchanger to achieve thermal efficiency in excess of 91%.

Gas fired units are fitted with a fully automatic forced draught burner complete with full safety controls to EN676.

  • Manufacturer: Thermobile
  • Model: BSG 75
  • Nominal heat output: 73KW
  • Air flow: 5004 M3/hr
  • Air throw (approx.): 17m
  • Temperature Rise: 43 deg C
  • Static Pressure: 100Pa
  • Fuel Consumption: 8.5 m3/hr (natural gas), 3.4 m3/hr (propane)
  • Fuel connection: 1/2" Rc
  • Minimum gas inlet pressure: 17.5 mbar (natural gas), 37.0 mbar (propane)
  • Main fan motor: 0.99kw, 7.2amp
  • Flue diameter: 150mm
  • Combustion air diameter: 125mm
  • Noise level: 72dB(A)
  • Nett weight: 243kg
  • Voltage: 230V

heater product code : R096.6075
recommended flue kit product code : ADD PRODUCT CODE

R096.6075 cabinet heater

  • Dimensions:-
  • A: 1900mm
  • B: 660mm
  • C: 925mm
  • D: 170mm
  • E: 150mm dia.
  • F: 320mm
  • G: 362mm
  • H: 280mm
  • J: standard - 330mm, extended - 660mm
  • K: 1778mm
  • L: 984mm

Cabinet Heater BSG 75, 73KW 250,000BTU, Gas, 6" Flue

£3,909.00 + VAT..... £4,690.80 (GBP)
carriage code 9

call us to order

BSG 75
  back to top