skip to top

01224 749051

29KW Gas Cabinet Heater - 230V

horizontal line

*Please state fuel type (natural gas or propane) at time of ordering*

This range of cabinet heaters for workshops, warehouses, industrial units, factories and retail areas is compliant with Part L2B of the 2010 Building Regulations. These space heaters are pre-wired with an electronic programmer to control heater on/off cycles, temperature, frost protection etc. A combined fan and limit switch is fitted on all heaters. In the event of overheating the unit will be automatically shut down by the limit thermostat. A four pass combustion chamber/heat exchanger assembly provides improved thermal efficiency with extended operational life. The stainless steel chamber is combined with a high efficiency cross flow tubular heat exchanger to achieve thermal efficiency in excess of 91%.

Gas fired units are fitted with a fully automatic forced draught burner complete with full safety controls to EN676.

  • Manufacturer: Thermobile
  • Model: BSG 30
  • Nominal heat output: 29KW
  • Air flow: 2196 M3/hr
  • Air throw (approx.): 14m
  • Temperature Rise: 39 deg C
  • Static Pressure: 75Pa
  • Fuel Consumption: 3.3 m3/hr (natural gas), 1.3 m3/hr (propane)
  • Fuel connection: 1/2" Rc
  • Minimum gas inlet pressure: 17.5 mbar (natural gas), 37.0 mbar (propane)
  • Main fan motor: 0.55kw, 3.2amp
  • Flue diameter: 125mm
  • Combustion air diameter: 125mm
  • Noise level: 67dB(A)
  • Nett weight: 196kg
  • Voltage: 230V

heater product code : R096.6071
recommended flue kit product code : ADD PRODUCT CODE

R096.6071 cabinet heater

  • Dimensions:-
  • A: 1650mm
  • B: 660mm
  • C: 662mm
  • D: 95mm
  • E: 125mm dia.
  • F: 250mm
  • G: 349mm
  • H: 280mm
  • J: 240mm
  • K: 1500mm
  • L: 835mm

Cabinet Heater BSG 30, 29KW 100,000BTU, Gas, 5" Flue

£3,166.00 + VAT..... £3,799.20 (GBP)
carriage code 9

call us to order

BSG 30
  back to top